Log in to join the conversation.
So Clover - discs w removable writing cards
Please support justyeo by Liking/Boosting their Print on MakerWorld.
Ever wanted to play So Clover but had a group of more than 6? This one is for you!
Some features:
• ~3 of these can fit in the box without lid lift (if your markers lie flat)
• Removable writing cards that can be replaced when badly stained
• “Anti-gravity” card slots that hold cards in place even when rotated more than 90 degrees
Some notes:
• From my testing, the bottom-most surface on a textured PEI sheet is the most erasable surface, compared to the top surface (stains easily) and ironed surface (doesn't erase properly)
• The bottom-most surface still stains a little, so you might eventually need to replace them
• I've found that erasing diagonally works best for me, might be due to the direction of the print lines
• The writing cards fit in the slots only one way, and you'll need to slot in the curved edges first
• I used a tolerance of 0.2mm, which works well for my printer. Your mileage might vary
More by justyeo
