Log in to join the conversation.
Edge Of Darkness Card Holder Attachment
Please support Kaiyoot by Liking/Boosting their Print on Thingiverse.
This card holder add-on snaps into position on the Edge of Darkness Tower (no damage) replacing the 3 card slots with 3 larger card ledges. These ledges hold the cards so that they do not fall forward when the card sleeve holds 3 or more cards.
It consists of 5 parts:
3 Front Ledges that hold the cards
2 Support arms
All 5 parts store within the tower base so it does not take up any extra room in the box.
More details at my Board Game Geek Post:
https://boardgamegeek.com/thread/2431084/tower-card-slot-holder-upgrade
Printed at 60mm/s in more or less 15 hours.
NOT FOR COMMERCIAL USE! Please let me know if you find any of my things being sold.
June 14, 2020 - V1.2 - The two lower cylinder pins have been shrunk to half their original height. This should help avoid accidentally breaking them off when removing the support material. I also filleted the rectangular decoration edges to make it print cleaner.
May 24, 2020 - I have uploaded V1.1 which has fixed the manifold issues with the brickwork in the outer ledges.
Edge of Darkness is a AEG board/card game which can be bought directly from the AEG website while supplies last or via their Edge of Darkness Kickstarters).
Here is the 3D Printed Card Holder I created to fix the Edge of Darkness Tower card slots that do a poor job at holding sleeves with 3+ cards inserted. The card holder is made from 3 front ledge pieces that hold the cards, plus two arms that hold the ledge securely in place. All pieces come apart and store within the tower base so no extra precious room is taken up within the box. More BGG details here:
/pic7279744.jpg)
/pic5400222.jpg)
/pic5400642.jpg)
/pic7279755.jpg)