Mage Knight Ultimate Edition (MKUE) Sleeved

for Mage Knight: Ultimate Edition (2018)

KDSBest + Follow

Inserts

6 plates 23h 25m 0.4 mm 1,100 g PLA Free

As sliced by the designer. Your printer and settings will vary.

View Print on MakerWorld

Please support KDSBest by Liking/Boosting their Print on MakerWorld.

Before you print

✓ Needs about 1,100 g From the designer's print profile

✓ Fits sleeved cards

This was inspired by Thogras MKUE Inserts. But wanted to remove as many plastic covers as possible, and make stuff more practical and useful at the time to play. Also didn't like the super tight tolerances, so this design has more lose tolerances, should be able to print in not perfectly tuned printers.

This can be used for sleeved cards.

There is a note on the print plate for the quantity. You need to print everything once but the Hero Print Plate 7x.

PLEASE NOTE: these inserts were designed to be complimented by a 14" x 14" x 2.25" (354mm x 354mm x 58mm) foam.

Hope you find this inserts useful.

mage knight mage insert knight ultimate