Burgle Brothers Game Inserts

This thing consists of STL files need to build two box inserts for the Burgle Brothers game box:BB Tray: A tray that sits on top of the cards and tiles and in which fits all of the walls (end compartment with finger-reach channel all the way down the side), the dice (shallow compartment next to walls), the various chits for the game (the round channels) and a compartment box into which fits the burgler character tokens. Remember to remove the cardboard in the upper box to ensure the room necessary for the insert.BB Tray Comp Lid: The lid that fits snugly onto the center character compartment. Note the circular inset on one end of the lid, which I use for gluing in a 1/2" x 1/16" neodymium magnet. This combines well with a map magnet ("push pin") applied to the top side of the lid for pulling it off. Note: before gluing be sure to check the magnet polarity between the two magnets to make sure they attract and not repel each other!BB Acc Box: A box that fits into the lower game box with the cards and tiles which I use to hold the guard figures and misc. (extra labels, etc.)NEW! - BB Short Acc Box: Same as above but shorter to match the height of the game tiles (63mm). Use this if you do not use card separators/indexes (which in my case are ~75 mm tall). See note below for more information.BB Acc Box Lid: The slide in lid for the above accessory box.BB Acc Box Lid Handle Opt 1 andBB Acc Box Lid Handle Opt 2: Two options for handles, one of which needs to be glued to the top of the lid AFTER sliding the lid most/all of the way in. Note: Do not glue before sliding the lid in as the lid will then not fit through the slot in the box. Leave a little space at the end the handle goes on to allow for finger grip when sliding the tray open.Acc Box Note: I use the following card dividers in my box, cut down to 75 mm tall: http://amazon.com/gp/product/B000R40GNU. With those in place, the tray balances well on top. Without them, the tray doesn't balance well, in which case you should use the BB Short Acc Box file.