Star Wars Rebellion + Rise of the Empire Boardgame Insert

This is an insert for the Star Wars Rebellion boardgame + Rise of the Empire expansion.

There is plenty other inserts in thingiverse for this game, but this is why I prefer mine:

• All pieces are printable in a 210x250 bed. No gluing required.

• All components and units fit in their own boxes. No sharing of boxes.

• Does not use as much material as other inserts I have seen out there.

• No oddly shaped boxes. All of them are square.

• Uses the space in the box effectively. There is even some leftover space at the top.

• Cards are not stored horizontally (difficult to pick up).

• Cards are not stored vertically (waste of space).

Can easily separate units and leaders to set up the game
The only drawback here is that it the card trays are not large enough for sleeved cards.

The trays for units and ships are inspired on https://www.thingiverse.com/thing:4232576 .

You will need to print 2 of ship-2-needed.obj and 1 of each of the other files.

You will also need 2 leader boxes.

The card trays have some dividers (included in the file) that you also need to print separately.
You will need 5 of the dividers for the big tray and 4 of the dividers for the small tray.

This can be accomplished by using the "Spilt" feature in PrusaSlicer

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: 0.30 mm Layer height

Infill: 15%

Filament: PLA

Notes: I used a 0.6 nozzle but smaller nozzles would work well too (I may take longer to print)