← Mansions of Madness ← MakerIggs

MakerWorld · added Oct 11, 2023 · updated Jul 19, 2026

124 downloads · 38 likes · 3 comments

LayerUp history

Added to LayerUp Jul 11, 2026

added by Scout

listing refreshed Jul 23, 2026

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Mansions of Madness Box Insert 2nd Edition

for Mansions of Madness (2011)

MakerIggs + Follow

Inserts

6 plates 18h 14m 0.4 mm 1,382 g PLA Free

View Print on MakerWorld

Please support MakerIggs by Liking/Boosting their Print on MakerWorld.

Before you print

✓ Needs about 1,382 g

Print profiles

0.28mm layer, 2 walls, 15% infill

6 plates 18h 14m 0.4 mm 1,382 g PLA

0.28mm layer, 2 walls, 15% infill

13 plates 21h 7m 0.4 mm 1,388 g PLA

As sliced by the designer. Your printer, filament, and settings will change these numbers.

Also on Printables 29

These beasts are 286x286. Just barely fitting on a CR10 model bed. I wound up printing them on my Ender 5 Plus which has plenty of room. Each was printed in about 28 hours with a .6 nozzle at .3mm layer height.

This design was not my own but I took the dimensions from https://www.reddit.com/user/Blouz.here : https://imgur.com/a/o5oGS

User abpat2203 started this project and looks like they only finished or about finished the bottom so I wasn't exactly sure where they left off and decided I would started over from scratch with the dimensions. I have made a few minor adjustments on the middle box after I printed to make it fit slightly better.

Excellent work Blouz, you gave me a great head start but it did take some finagling to convert foam to filament.

Print Settings

Printer Brand:

Creality

Rafts:

Supports:

Resolution:

0.3

Infill:

15%

Filament:
Beartech PLA

Black