Starship Captains Insert

This is my first try of creating in inlay for a boardgame. So please don't blame me to much ;).
As I couldn't find any here I just tried it myself and share my results.

So hopefully someone can benefit from this.

You need the following:

2x Meeple Holder
1x Token Box 1
2x Token Box 2
4x Player Box
1x Card Box
1 x Spacer
1x Board Spacer (two items) if you want to place your box standing up.

I couldn't find a better way too arrage the item s in the box as there are many big board tiles.

So I designed the cardbox to be able to lay down without anything being able to move when twisting the box. The Card box has multiple slots for

• Mission cards / Stations (Big Cards)
• Upgrade Cards (small Cards)
• (Big Solo cards)
• (Small Solo Cards)

I also added borad spacers for the case you want to store the game in vertical position.
The board spacers will clamp the board to the lid so every token box is covered (Please make sure to place the rulebook directly over the token boxes.

Meeple Boxes are covered from the smaller player boards and the board for the upgrades.
The “Upgrade baord” should be on top of the others as it is slightly shorter. The Boardspacer will also hold down this tile.

I hope the pictures explain how it is intended to use.

The uploaded design for the “Meeple Holder” is slightly diffrent from the picture.
I added a seperator in the uploaded files but did not print it again.

Also the PlayerBox was slightly updated. I removed the Pylon which was initally intended to hold the upgrade rings. But after printing I noticed that it doesn't fit so I removed it for the final upload.