Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Terrorscape Insert for 3d printed Mansion
7 plates
19h 45m
0.4 mm
966 g PLA Free
View Print on MakerWorld
Please support Maxisally by Liking/Boosting their Print on MakerWorld.
Before you print
✓ Needs about 966 g
Print profiles
0.2mm layer, 2 walls, 9% infill
7 plates
19h 45m
0.4 mm
966 g PLA
0.2mm layer, 2 walls, 15% infill
1 plate
2h 43m
0.4 mm
146 g PLA
As sliced by the designer. Your printer, filament, and settings will change these numbers.
Hello.
Finally, I got the expansion boxes a week ago.
I made an insert that fits the mansion model.
(https://makerworld.com/ko/models/891479)
Please take a look at the photos and use it. Thank you.
• You can edit the letters on the tray
2. Survivor miniature holder
I'm not sure only korean version minis will fit with holder.
It has different size from the boxes.
I set the diameter for 27.2mm and 27.55mm
If the minis are not fit, please comment the size your minis with rubber ring. I will try to help you.
/pic9272971.png)
/pic9272974.png)
/pic9272970.png)
/pic8929121.png)
/pic7680964.jpg)
/pic7680963.jpg)
/pic7680965.jpg)
