Catan resource box

A small, practical box that keeps your CATAN resource cards organized and safely stored.

Supported card sizes:

• 54x80 mm

• 43x67 mm

Please ensure to select the print profile that matches your CATAN resource cards.

Assembly:

• Use a small piece of filament as a hinge pin to connect the parts.

• Insert 4 magnets, size: 6x2mm

Update (2026-05-03)

I've trimmed the height and the inside of the flaps slightly. Some users experienced that the box would'nt fully close. Please let me know if the problem persist.

Update (2026-03-06)

I've increased the height of all print profiles slightly to make room for expansion packs. Thanks for all your feedback!

Boost Me Thank you ❤️

Tips and tricks for better results

• If the pins are hard to insert, use a pliers and force them in a few mm at a time, or the pin will bend.

• If the lid doesn't fully close, try expanding the pin holes slightly with a 2mm drill at the end of the lids.

• Use strong magnets! I've had great result with the ones from the Bambu store, and not so much with the cheap ones from Aliexpress and similar sites.

• Try different filament

• Calibrate your printer

• If everything fails, let me know and I'll do my best to assist