Happy Pigs Insert

This is an insert for the game Happy Pigs. It's for the Iello 2016 version with a box size of about 253 x 253 x 68mm. It allows for the game to be stored upright and accommodates sleeved cards (I used Mayday MDG 7145 80 x 80mm thin sleeves).The design was accomplished using the excellent The Board Game Insert Toolkit - Parametric Box Design by MysteryDough.There are 2 options for printing this insert - use part of the box or use the full box. I opted to use part of the box as shown in the included pictures.Part BoxYou need the following:1 x happy_pigs-pigs_full.242x92x66.tray.stl1 x happy_pigs-pigs_full.242x92x66.lid.stl1 x happy_pigs-money_part.180x150x28.1.tray.stl1 x happy_pigs-money_part.180x150x28.1.lid.stl1 x happy_pigs-seasons_part.180x150x10.tray.stl1 x happy_pigs-fields_part.180x150x27.9.tray.stlNow depending on how accurate your printer is, you may or may not need this:1 x happy_pigs-fields_part.180x150x27.9.lid.stlI had designed it such that these 3 pieces:Money tray + lidSeasons trayFields tray + lidwhen stacked would be the same height as the Pigs tray + lid. When I printed my copy I found that I didn't need to print the Fields lid and it was OK.Full Box (uses quite a bit more filament)You need the following:1 x happy_pigs-pigs_full.242x92x66.tray.stl1 x happy_pigs-pigs_full.242x92x66.lid.stl1 x happy_pigs-money_full.242x150x28.1.tray.stl1 x happy_pigs-money_full.242x150x28.1.lid.stl1 x happy_pigs-seasons_full.242x150x10.tray.stl1 x happy_pigs-fields_full.242x150x27.9.tray.stlNow depending on how accurate your printer is, you may or may not need this:1 x happy_pigs-fields_full.242x150x27.9.lid.stlI had designed it such that these 3 pieces:Money tray + lidSeasons trayFields tray + lidwhen stacked would be the same height as the Pigs tray + lid. When I printed my copy I found that I didn't need to print the Fields lid and it was OK.NoteThe files here are slightly different from what I had printed, I tweaked the size of the compartments making them a bit larger. In my first iteration the 1st player token didn't fit in it's allocated space so now in it's place I'm using the pig that I had printed out when I first got my printer (it was one of the sample models bundled with the SD card that came with the printer).