Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Ezra and Nehemiah Insert - Remix

3 plates 5h 59m 0.4 mm 221 g PLA Free
View Print on MakerWorld

Please support mpuffe by Liking/Boosting their Print on MakerWorld.

Before you print
Needs about 221 g
Fits sleeved cards
Print profiles
0.2mm layer, 2 walls, 15% infill
3 plates 5h 59m 0.4 mm 221 g PLA
0.2mm layer, 2 walls, 15% infill
4 plates 5h 51m 0.4 mm 221 g PLA
As sliced by the designer. Your printer, filament, and settings will change these numbers.

This is a Remix of the cool insert made by Shobai ( 6629405 ). :)

Does not fit sleeved cards. Non commercial use!

Update 15/06/2026

Meanwhile I have decided to sleeve the Large Cards because they already show some signs of wear. So I have changed two of the files to fit sleeved cards. If you want to change your insert or print it that way, you don't want to print:

• "Ezra and Nehemiah - Large Cards and Non Player.stl"

• “EzraAndNehemiah_Sleeved_Money_V1.stl”

Instead go with the three new files:

• Money New _ Cards.stl

• Money New.stl

• Large Cards and Non Player New.stl

Please be aware that you will have to store 5 coins per player in the corresponding player tray now. :)

ezraandnehemiah boardgame boardgames boardgameinsert boardgameinserts boardgameinlay boardgameinlays boardgameorganizer
Ezra and Nehemiah box art Ezra and Nehemiah 2024
Match filament

Main colors from the cover art. Find matching filament, or tap swatches to narrow.