Clank! Catacombs Dungeon Row Organizer

The “Clank! Catacombs insert & organizer” by ClixAccessories insert uses "fillers" to keep things tight in the box. This add-on cleverly replaces those empty blocks with functional table organizers (the Dungeon Row and Reserve holders) for the base game without expansions.

• Dungeon Row Stand: Holds 6 cards for the active dungeon row.
• Note: To complete the assembly, print this file once, then mirror it to print the other side.

• Has slots for 6x3mm magnets (optional).

• Reserve Holder: Holds the Goblin card stack, plus the Mercenary, Explore, and Secret Tome stacks.
• Note: The STL model is provided as a single solid piece. To fit it on the build plate, you will need to cut it into parts using the 'dovetail' mode in your slicer. May require gluing after printing.

• Dungeon Deck Holder: Keeps the draw pile organized on the table.

⚠️ All notes above apply to the raw STL files. The provided .3mf file is already pre-configured and ready to print immediately.

Here is the organized Master Printing Checklist based on the instructions you provided. This combines the new files with the necessary original files to create a full storage solution.

• Print current add-on content ( .3mf file recommended )

• 1x Clank! Catacombs Token Holder

• Print next models from ClixAccessories:
• 4x CC-player (OR " Clank! Catacombs Player Tray "): You need one for each player color.

• 1x CC-tokens1 : Storage for general game coins.

• 1x CC-cards : Storage for the main deck cards inside the box.

• 1x CC-tiles : Storage for the map tiles.

• 1x CC-tiles-riser : Likely goes under the tiles to flush them to the lid.

• 2x CC-bag : This is a spacer used to fill the void and can be used for Dragon bag storage.

• Magnets: If you want the Dungeon Row to snap together nicely, you will need 6x3mm round magnets .

• Gluing: The Reserve Holder prints in parts to fit the print bed and may need to be glued. Superglue (Cyanoacrylate) works best for PLA.

The box still has plenty of unused space that could potentially be used for storing expansions. Unfortunately, I do not have access to these expansions because they have not yet been localized in my country 🇺🇦.

Feel free to leave comments below, thanx.

• 2025-04-08 Fixed Dungeon row model card cell width from 66 mm to 67 mm (same size as in Dungeon Deck model)