Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Doom Red Access Key Card (Office Card Holder)
Card & Deck Holders
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
✓Needs about 22 g
From the designer's print profile
Print Profile (2)
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
1 plate
3h 55m
22 g PLA
A1, X1E, H2D, X1, A1 mini, P1P, X1 Carbon, P1S, H2D Pro, H2S, P2S, H2C, X2D, A2L
This is an actual office key card holder (Office access card standard size for 54mmx86mm)
Printed face side down ( I used a smooth plate) at .1mm layer height and using a .2mm nozzle
Important - Start with white filament otherwise the red will bleed through
Plate Details (1)
0.2 mm nozzle, all plates
Plate 1
3h 55m
22 g
PLA · 2 g
PLA · 2 g
PLA · 16 g
PLA · 2 g
0.4mm nozzle, 0.2mm layer, 3 walls
1 plate
1h 6m
24 g PLA
X1 Carbon, P1S, P1P, H2D, H2S, H2C, P2S, H2D Pro, A1, X1E, A1 mini, X1, X2D, A2L
Pushing the limits of my 0.4mm nozzle by printing at 0.3mm line width.
Small text details removed to work better with 0.4mm nozzle.
Thanks to @NAIAD3D for a great model!
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
1h 6m
24 g
PLA · 2 g
PLA · 2 g
PLA · 19 g
PLA · 1 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Model Description
This is an actual office key card holder (Office access card standard size for 54mmx86mm)
Will also work with credit cards as I just discovered, so hey, go use your tap card with this.
Printed face side down ( I used a smooth plate) at .1mm layer height and using a .2mm nozzle
Important - Start with white filament otherwise the red will bleed through
Membership Please consider a membership to my models (100+) Boost Me please consider a boost
/pic98187.jpg)