Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Multifunctional RummiKub Stand (assembles to Box!)
Miniatures
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
✓Needs about 444 g
From the designer's print profile
Print Profile (2)
0.2mm layer, 2 walls, 15% infill
2 plates
13h 27m
444 g PLA
X1 Carbon, P1S, P1P, X1, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
0.2mm, 10mm brim on stands,
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1
2h 49m
79 g
PLA · 4 g
PLA · 75 g
Plate 2
10h 37m
365 g
PLA · 365 g
Rummikub Large Numbers Edition .2mm layer, 2 wall, 15% infil
1 plate
25h 9m
786 g PLA
H2C, H2S, H2D Pro, H2D, A2L
• Added a Rummikub Logo
• Adjusted the size to fit the original “Rummikub Large Numbers Edition” tiles which are a little thicker than the included tiles.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
25h 9m
786 g
PLA · 60 g
PLA · 726 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Model Description
Demo:
This is a set of Rvmmy game pieces and stands that assemble into a self-contained box to store.
The four stands (2x two types) slot together to create the box with the lid parts.
Each stand has four rows, to hold around 8-10 pieces each. The back and front row work as the mechanism to slide the four stands together to create the main body of the container. The bottom lid is attached first (and is practically the same as the top lid, before pouring in the game pieces.
Check for the heatbed texture on the bottom of the prints to help with aligning them. It takes a few tries at first, but you will figure it out. Onece fully assembled, press on the side of the clip of the lid to release it.
/pic2315912.jpg)