Replacement Potion Counters for Die Wandelnden Turme (The Wandering Towers) board game

It turns out that the cardboard potion counters for The Wandering Towers are not resistant to having half a bottle of soda spilled on them… This was the main motivation behind creating these replacement counters.

They are proportioned similar to the stock counters, although as a symmetrical shape.

• Zaubertrankflasche.f3d - Parametric design file

• Zaubertrankflasche.3mf - Manufacturing file

• Colour change:
• If you use the default scale in the manufacturing file the model is 2mm thick, so choose a layer height that allows you to divide the model in half horizontally

• Slice the bottom half of the model in the primary colour of the potion you desire

• Slice the top half in a subdued colour representing the empty potion bottle
• The little wizard hat label is recessed so that if you slice the model in this way, the primary colour will show through as the wizard hat shape.

• Nozzle: I used a 0.25mm nozzle with a 0.1mm layer height

• Build plate: I used the Prusa textured plate for the nice effect on the primary colour side, but any should work.

NB. I know the design file is a hot mess… sorry! My CAD experience is limited to simple mechanical parts made out of nice simple geometric shapes, which fits nicely in my simple brain!

PS. In picture 1 there are some replacement towers that I have designed as well, you can find them here if you're interested.