Compact Magnetic Bang! Card Game Holder

for BANG! (2002)

peterdanos + Follow

Card & Deck Holders

Free

View Print on Thingiverse

Please support peterdanos by Liking/Boosting their Print on Thingiverse.

This is a compact holder for the card game Bang. It only fits the original game, without the bullets or legend cards. Two 10x2mm magnets are needed for this. Drop the magnets in just before the printer bridges the holes. If your printer has steel parts in the hotend use double sided tape to stick the magnets to the bottom of the holes so they don't stick to the hotend when it passes over it.See the print settings for additional details.I used these magnets:https://www.aliexpress.com/item/50pcs-Neodymium-magnet-10x2-Rare-Earth-small-Strong-Round-permanent-10-2-mm-fridge-Electromagnet-NdFeB/32890853468.html?spm=a2g0s.9042311.0.0.44064c4dd1Y3Rr

From BoardGameGeek

Compact Magnetic Bang! Card Game Holder by peterdanos Oct 4, 2018 This is a compact holder for the card game Bang. It only fits the original game, without the bullets or legend cards. Two 10x2mm magnets are needed for this. Drop the magnets in just before the printer bridges the holes. If your printer has steel parts in the hotend use double sided tape to stick the magnets to the bottom of the holes so they don't stick to the hotend when it passes over it. See the print settings for additional details.