DND initiative tracker for DM screen or table

This is a magnetic DND initiative tracker, in total you will need 61 6x2mm magnets, you only really need 40 if you don't want the turn tracker (the sword). This was made for my dm screen with is 20 inches long and 3/16 of an inch thick, but a stand is also included to set it on the table. Feel free to edit it towards your needs. No uploading as a remix however, and no, that will not change.

Originally, I was going to use a method of cutting out paper slips 23mmx24mm, which was really annoying because of how exact it needed to be. After my first session of using this, I hated it, and so I went to find a solution. My solution, as always, was 3d printing. I added another profile because the inserts needed different settings, specifically Arachne wall generator and a lower layer height so they could be more accurate. They include 25 enemy and 25 NPC inserts, along with every class in the PHB and the Artificer. It also has a holder for these inserts which fits into my Tiered dice box ( here ).

This system goes perfectly with my Enemy and NPC coins I made ( here )

Clean your build Plate and I recommend a textured plate for easy removal. I used a supertack plate, and while it offered that nice flat finish and amazing bed adhesion, they are annoying to remove. If you do use the supertack plate, put your scraper under each one, one at a time and pull up.