Initiative Tracker - Game Master Shield Mounted

This build consists of 4 parts:

• Rails without locks - fits to the top of the standard game masters shield. They will not maintain position relative to their neighbors.

• Rails with locks - fits to the top of the standard game masters shield. They are designed to interlock with the neighboring rails.

• Frame - Fits atop the rail and locks from side to side. They have a small slit and windows to allow for 45mm x 50mm paper, laminated paper or stiff plastic to be inserted into them.

• Turn indicator - fits in to the rail along the top of the frame. Can slide from frame to frame to indicate who's turn it is.

Usage notes:

Rails: Five of the rails (2 without locks, 3 with locks) will fit across the center two panels. See picture below to indicated how the are orientated.

Turn Indicator: Consider printing a number of these, once the turn has gone through all frames for that particular encounter set it aside to count turns easily. Especially for those long, drawn out epic combats.

Printing Notes :

The frames with interlocks need supports to print properly as indicated below:

The other models are should be able to be printed without support depending on printer bridging capability.

Happy Printing and keep those campaigns a-rolling.