Here to Slay and Expansions Insert

This is an insert/organiser for Here to Slay ‐ Standard edition (2020) that also fits all 3 main expansions (Warriors & Druids, Berserkers & Necromancers and Here to Sleigh). It has plenty of space for promo cards, mini expansions and (most likely) at least one other expansion if they releaes any more. It measures 201.4 mm long by 168 mm wide by 38 mm high. It fits perfectly in my game's box with room for the rules on top. This tray does not fit sleeves. If you want a tray for sleeved cards, there are several other designs on Thingiverse. I could probably make it work for sleeved cards, but don't really see the point.

There are four different designs. The only difference being the space in the middle to hold the dice. I have only printed and tested the first design myself, but all should work fine.

1) Has 2 slots to hold the pair of 16 mm dice that came with the game.
2) Has a slot 23.8 x 68 mm long that could fit 4 pairs of 16 mm dice.
3) Has a slot 23.8 x 101 mm long that could fit 6 pairs of 16mm dice.
4) Has a slot 23.8 x 131 mm long that could fit 8 pairs of 16 mm dice.

For the latter 3 designs, if you put the maximum number of dice in it could be tricky to remove them without turning the tray upside down. You could place a piece of paper or ribbon in the slot before inserting the dice to make removal easier (similar to some consumer electronics battery removal systems).