Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Terraforming Mars - Ares Expedition & Crisis

1 plate 4h 46m 0.4 mm 108 g PLA Free
View Print on MakerWorld

Please support Samurai57 by Liking/Boosting their Print on MakerWorld.

Before you print
Needs about 108 g
Covers Terraforming Mars: Ares Expedition – Crisis
Print profiles
0.2mm layer, 3 walls, 15% infill
1 plate 4h 46m 0.4 mm 108 g PLA
Crisis - 0.2mm layer, 3 walls, 15% infill
1 plate 5h 2m 0.4 mm 112 g PLA
Marker - 0.2mm layer, 2 walls, 15% infill
1 plate 37m 0.4 mm 8 g PLA
Counter - 0.2mm layer, 2 walls, 15% infill
1 plate 1h 21m 0.4 mm 24 g PLA
Phase Abovve - 0.2mm layer, 2 walls, 15% infill
1 plate 1h 27m 0.4 mm 36 g PLA
Phase Below- 0.2mm layer, 2 walls, 15% infill
1 plate 1h 26m 0.4 mm 36 g PLA
As sliced by the designer. Your printer, filament, and settings will change these numbers.

Please give me a "like" if you download it
If you have finished prints, please post a photo

This is the NEW Verion V2 with separate color fields and CRISIS-BOARD

Since I haven't found a board for TM-Ares Expedition yet and I don't like it when the markers & tiles keep slipping, I designed this one. I used the graphic design by Alan Eshelman ( https://boardgamegeek.com/user/Alan%20Eshelman ) as a template (thanks for the work).

I only uploaded the .3mf files because otherwise it would be too confusing.
If you need a single .stl file, you can download it directly using your slicer software.

If you have any questions or suggestions, please feel free to contact me.

tm terraformation mars t terraforming mars ares crisis