← Power Grid ← Sanctuary Moon

MakerWorld · added May 4, 2025 · updated Jul 17, 2026

51 downloads · 11 likes · 5 comments

LayerUp history

Added to LayerUp Jul 11, 2026

added by Scout

listing refreshed Jul 22, 2026

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Elektro Poker Chips for Power Grid Board Game

for Power Grid (2004)

Sanctuary Moon + Follow

Inserts

10 plates 16h 7m 0.4 mm 305 g PLA Free

View Print on MakerWorld

Please support Sanctuary Moon by Liking/Boosting their Print on MakerWorld.

Before you print

✓ Needs about 305 g

Print profiles

0.2mm layer, 6 walls, 25% infill

10 plates 16h 7m 0.4 mm 305 g PLA

0.2mm layer, 6 walls, 25% infill, single piece print

5 plates 17h 57m 0.4 mm 326 g PLA

As sliced by the designer. Your printer, filament, and settings will change these numbers.

These poker chips replace the paper money in the Power Grid board game. They are based upon the Poker Chip - Easy Two Piece by FJ2002, with numbers added on one side and an embossed image of the “elektro” symbol. To replace the paper money in the same quantities, you should print the following plates:

2x - Plate 1 named 1 Elektro Front (20 pieces)

2x - Plate 2 named 1 Elektro Back (20 pieces)

1x - Plate 3 named 5 Elektro Front (15 pieces)

1x - Plate 4 named 5 Elektro Back (15 pieces)

2x - Plate 5 named 10 Elektro Front (20 pieces)

2x - Plate 6 named 10 Elektro Back (20 pieces)

2x - Plate 7 named 50 Elektro Front (13 pieces)

2x - Plate 8 named 50 Elektro Back (13 pieces)

This will give you 40 1s, 15 5s, 40 10s, and 25 (really 26) 50s.

To assemble, it's recommended to use a flat-side hammer to tap the pieces together into a perfectly flat poker chip. If you do not have AMS, you can insert a pause on the front side between the two colors, as there is only one filament change. The back sides do not require AMS at all.

powergrid pokerchip pokerchips