Log in to join the conversation.
The 7th Continent Dividers
Please support sbellon by Liking/Boosting their Print on Thingiverse.
Dividers for the game [The 7th Continent](https://www.boardgamegeek.com/boardgame/180263/7th-continent).
The first upload had the dividers with 1 mm thickness. After printing a couple, I think having them at 0.6 mm is sufficient. You can still scale them in Z axis if you want a different thickness.
I also decided to flip them over 180°, so that the front is on the print bed. Then you get a nicer finish on the front (especially with power coated print beds).
The adventure card trays in the picture are [Thing 3731880](https://www.thingiverse.com/thing:3731880).
The 7th Continent 2017
Match filament
/pic5673865.jpg)
The 7th Continent: A Prison of Clouds 2020
/pic5673875.jpg)
The 7th Continent: Forgotten Passages 2020
/pic5473326.jpg)
The 7th Continent: The Crystal's Song 2020
/pic5673900.jpg)
The 7th Continent: The Veins of the Earth 2020
/pic4803369.jpg)
The 7th Continent: Comfort Creatures 2019
Show 10 more
/pic4803372.jpg)
The 7th Continent: The Flying Roots 2019
/pic3827383.jpg)
The 7th Continent: What Goes Up, Must Come Down 2019
/pic5703346.png)
Lost & Found (fan expansion for The 7th Continent) 2018
/pic3723334.png)
The 7th Continent: Facing the Elements 2017
/pic3723336.png)
The 7th Continent: Fear the Devourers 2017
/pic3723340.png)
The 7th Continent: Path of Repentance 2017
/pic3723342.png)
The 7th Continent: Swamp of Madness 2017
/pic3723344.png)
The 7th Continent: The Forbidden Sanctuary 2017
/pic3723346.png)
The 7th Continent: The Icy Maze 2017
/pic2726806.jpg)
The 7th Continent: Print & Play Demo 2015
