Pitchcar Track

for PitchCar (1995)

scottkarch + Follow

Scoring & Tracking

Free

View Print on Thingiverse

Please support scottkarch by Liking/Boosting their Print on Thingiverse.

Also on Cults3D 7

Thanks to Flounder1664 for the initial track pieces. Mine fit.. but are too tight. I'm going to be making slight tweaks to the connectors to get them to fit more loosely.. similar to the official wood pieces......

I'll be uploading 3D files as I make them. My print bed is limited to about a single full sized 90 degree turn. So no long straights. I used a piece from Flounder1664's pitchcar set to get the connectors. They worked great, so all my work will be based on Flounder1664 work.

Hollow segments printed upside down to save filament and speed up print times.

The Pinch short straight should work if you print two. In my modeling app, rotating it fits fine.

Someone help me with guard rail ideas. Right now, I'm making models with rails built in. Thinking of making 3D printed guard rails with pegs built into them. Road sections will have holes for pegs to fit into.. any other ideas?

From BoardGameGeek

- the designer didn't have a set to test with (and some of the parts may be large), but one of the comments says it does work, it is just a tight fit. This set also includes a short ramp and a short flat ended section. It also has a 3 way intersection piece that can be used to split the track path similar to Extension 8 (but is much smaller). PitchCar Track