Actual Agricola 15 Storage (A15 plus expansions) Remix

A remix of the Agricola 15 insert designed to hold the actual contents of the full A15 box, plus Revised expansions:

-- Farmers of the Moor
-- 5/6 Player Expansion
-- C Deck
-- D Deck
-- E Deck
-- Consul Dirigens Deck
-- and a pen!

SIZING NOTE: My box was 5-10mm larger than the original design needed. I stuck with the original dimensions as often there is variance in box sizes. This is definitely not a vertical-safe design anyway, so the extra space should not make much difference.

(Also, the player box pic shows a bunch of prototypes, the plain wood player box is the final design.)

Printing instructions:
================

All files needed are included in this remix with the appropriate quantities (x1 if not specified). One original file was renamed to change the quantity needed. Detailed notes are below (useful if, for example, you printed some or all of the original).

New Files
-------------

`5Food_DestructionTile_BlitzSeasons_A15_x1.3mf`
[new, uses space from printing fewer deck holders]

`Card_Box_A15_x2.3mf`
[replaces Card_Box_x6; same dimensions, just has a gap in the bottom and at both ends to make it easier to get cards out]

`Extra_Food_A15_x1.3mf`
[new, uses space from printing fewer deck holders]

`Player_Box_A15_x6.3mf`
[replaces Player_Box_x6; gets rid of Wizkids mini wells, adds separate space for stables.]

`Resources_1tray_A15_x2.3mf`
[replaces Resources_2_x2; well deeper to hold x5 markers]

`Resources_2tray_A15_Wood_x1.3mf`
[replaces one of Resources_1_x2; well wider to hold x5 markers]

`Sheep_Pig_Cow_A15_x1.3mf`
[replaces Sheep_+_Pig]

`Spacer_A15_x1.3mf`
[replaces Spacer]

`Spacer_Misc_A15_x1.3mf`
[new, uses space from printing fewer deck holders]

`Spacer_Pen_A15_x1.3mf`
[new, uses space from printing fewer deck holders]

`Tiles_Box_2_A15_x1.3mf`
[replaces Tiles_box_2_x1; if you have the old one printed you could use it]

`X_Woodland_Fairy_A15_x1.3mf`
[new, uses space from printing fewer deck holders]

`Card_Divider_A15x4.3mf`
[for E-deck dividers, blank]

NOTE: As mentioned above, the card box design just has qualify of life edits; if you have the old ones printed they work fine. Note the subtle slant in the back, nice design touch.

NOTE: Extra_Food_A15_x1 is, well, extra because there was some space leftover. I put some food and the x5 food markers in there to use during play. Go wild, the sky's the limit.

Old Files to still print:
----------------------------

`Burn_Marker_+_Tokens.stl`
`Cows_+_Horses.stl`
`Food.stl`
[unlike original pic, x5 food markers go elsewhere]

`Resources_1_x2.stl`
[only print 1, renamed to Resources_1_x1.stl in remix]

`Tiles_Box_1.stl`
`Tiles_Box_3.stl`

NOTE: Player_Box_x6 still has space for the old Wizkids player minis which are definitely not part of A15. I couldn't think of a good use for the space and had already printed a few so didn't change it. Use the slots as mini-cup holders, or keep your smaller cigars there.

Old Files to no longer print:
------------------------------------

`Card_Box_small_x9.stl`
[not needed, used to store pre-Revised decks]

`Card_Box_x6.stl`
[replaced by Card_Box_A15_x2 and card box that comes with A15]

`Player_Box_x6.stl`
[replaced by Player_Box_A15_x6, if you have this printed you could use it]

`Resources_2_x2.stl`
[replaced by Resources_1tray_A15_x2]

`Sheep_+_Pig.stl`
[replaced by Sheep_Pig_Cow_A15_x1]

`Spacer.stl`
[replaced by Spacer_A15_x1]

`Tiles_Box_2.stl`
[note, the special slots at the end don't fit anything in A15, but if you have this printed you could use it]

NOTE: This was designed and tested with non-sleeved cards. I suspect there would not be space for all cards sleeved, but am not going to sleeve all my cards to test it. :)