ENDER 3 Modifications - Betrayal at House on the Hill - Organizer (& Baldur's Gate)

Remixed from Ender3D's "Betray at House on the Hill - Organizer (& Baldur's Gate)" https://www.thingiverse.com/thing:3577659 or "on Cults3D" https://cults3d.com/en/3d-model/game/betrayal-at-house-on-the-hill-organizer-baldur-s-gate

I modified the Book Tray into 2 halves which can be glued together and narrowed the Token Tray so both are able to be printed on the smaller bed of an Ender 3 (235x235mm).
I also widened and slightly lengthened the Spacer and added an extra Spacer (if desired, for the small gap created by narrowing the token tray)

Prints:
1x Book_Tray_Ender3_1.stl & 1x Book_Tray_Ender3_2.stl - use the tabs and glue together.
3x Token Tray (print in the diagonal orientation in the image/STL or it wont fit the bed)
1x Spacer
1x Extra Spacer (if desired)
This download only contains these modified files, you will need to download the other pieces from the original: https://www.thingiverse.com/thing:3577659

Note: Make sure your Slicing software is set to use the full size of the Ender 3's bed 235x235mm, not just 220x220 which a lot set as the default.
If you have metal clips holding your build surface down you may still not be able to print the Token Tray, I have a glass bed and no clips so can't guarantee it will work for you.

Printed in PLA at:
Resolution: 0.2
20% infil
Brim: Yes
Supports: Yes - for Book_Tray_Ender3_1 only

Printer Brand:

Creality

Printer:

Ender 3

**Rafts:**

No

Supports:

No

**Resolution:**

200

Infill:

20

**Filament:** Technology Outlet PLA
Black

Notes:

Printed in PLA at:
Resolution: 0.2
20% infil
Brim: Yes
Supports: Yes - for Book_Tray_Ender3_1 only

Category: Games