Log in to join the conversation.
Grand Austria Hotel incl. extension Alles Walzer
Please support Tangshile by Liking/Boosting their Print on Cults3D.
This model was created from the expansion of an existing model (Grand Austria Hotel insert by tvkili on Thingiverse: https://www.thingiverse.com/thing:4031248) that I used to stow my base game - then came the expansion.
I decided to continue using two elements of the basic design (09 and 10 - are printed in orange in my photos) so I don't have to reprint everything again and added elements 01-08. This way everything can be stored in the basic box. The solution has a slight overhang (about 5mm), for that I didn't have to throw away the old inlay.
If I had redesigned everything, it might have been possible to avoid the overhang - but in times of environmental protection......
Additional notes:
- The holders are designed for cards in premium sleeves.
- Only card holder 02 needs to be printed twice.
- Box 07 has a lid 08 that must be carefully pressed into the hinges of the box.
- The game boards need to be well spaced at the bottom and slid in level. To make it easier to get them out again you can put a strip of paper and the boards. To protect the print on the boards, it is advisable to put a paper or thin cardboard over the boards.
