Jungo Compatible Compact Travel Box

The newest addition to my compact travel game line!

• multicolor and single color versions

• color change at layer height lid

• notched lids keeps everything in place

• sleeved and unsleeved (fits Gamegenic Standard Card Game 66x91)

Print ONE box and ONE lid. Make sure to print the SLEEVED versions if you are using card sleeves, print the normal versions if not. The suffix _sc means single color, it has slightly indented text.

PRINTING TIPS:

Notched Lids: The lids have small notches to align the lid closed. They should be slightly loose and snap shut with a click, and shouldn’t fall out if shaken. If the lid is too tight you can lightly sand the edges until fit. If too loose, reprint and increase the size by .1 or .2mm in the long direction only.

Multicolor printing: All parts are optimized for multicolor printing except _sc boxes. In your slicer right click the object and select Split>to parts . Select the colors for printing. PRO TIP: first make the entire object the color of the design and then you only have to change the color of the main piece instead of every small piece.

Layer Height Color Change: The lid is designed to also work for color change at layer height. In your slicer you can add a pause/color change at the appropriate layer. This is a different process depending on the slicer, but usually follows these steps. Slice the object, then drag until you reach the layer you want to change color. Right click on the layer bar and select “Add Color Change” or “Change Filament”. Reslice the object and check to be sure you have selected the correct layer. Your printer will either pause and walk you through a color change, or automatically change color.

________________________________________________________________________________________

Check out all my free designs here on Printables! If you want to support my work and all of the free designs I bring to the community consider buying something from my Etsy shop or my Printables Store .