Splendor Box v2 Color Logo

Update 4/5/24: Newest version here . Don't print this one!

_______________________________________

This is simply a v2 of my previous design with a deeper logo and printable letters. Print the box, gem tray and lid as normal. Print 3 sets of the letters “SPLENDOR”. Using superglue carefully glue the letters in the appropriate spaces. I've found it works best when I use a toothpick to spread the glue to all corners, quickly place the letter, and use the toothpicks to hold the pieces in place for 10-20 sec until they start to hold. It is a tedious process, but still has the desired effect.

If you have a MMU, then choose the appropriate files and do what you do best! Fair warning-I do not know exactly how to make the files compatible, so I included a few different things. Please let me know if the files work or don't work!

Here is the link to the original box (with better pictures).

Update 4/13/23: I made a version B with more wiggle room for different sized components. I got comments that the nobles space wasn't deep enough and the gem tray too tight, so I increased the sizes to allow more space. You can print the original if your components are the same as below. If they are slightly larger, print version B. (The two color letters should work for this one as well, just be a little tighter fit).

• Gems: 43 x 3mm

• Nobles: 60 x 60 x 1.5mm

• Cards: 63 x 88mm

Happy Gaming!

Check out my other board gaming designs here on Printables!

I have designs for Honey Buzz, Project L, Isle of Cats, WILD Serengeti, Draftosaurus, Copenhagen and Witchstone available at my Etsy shop Taylor Jane Design Co .