← Return to Dark Tower ← tntfriesen1

MakerWorld · added Mar 18, 2026 · updated Jul 19, 2026

36 downloads · 14 likes · 4 comments

LayerUp history

Added to LayerUp Jul 11, 2026

added by Scout

listing refreshed Jul 22, 2026

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Return to Dark Tower - Skull Blocking Walls V2

for Return to Dark Tower (2022)

tntfriesen1 + Follow

1 plate 1h 40m 0.4 mm 45 g PLA Free

View Print on MakerWorld

Please support tntfriesen1 by Liking/Boosting their Print on MakerWorld.

Before you print

✓ Needs about 45 g

Return to Dark Tower walls to stop the skull from rolling off the map/table. Very helpful!

There are two variants, one for the 800mm neoprene mat and one for the 600mm board that comes with the base game.

You will need to print 9 walls. Each segment should fit on a build plate as small as 230x230. You may need to rotate the model after loading into your slicer to get it to fit.

6x3mm magnets required for the 600mm version and 6x3 or 8x3mm magnets required for the 800mm version. Qty: 9 walls X 4 magnets per wall = 36 total magnets

Supports should NOT be needed. The magnets holes are purposely slightly oblong on the top to account for a little filament sagging.

return to dark tower walls skull