← Steam ← Tom

MakerWorld · added Apr 6, 2025 · updated Jul 22, 2026

1,421 downloads · 915 likes · 72 comments

LayerUp history

Added to LayerUp Jul 11, 2026

added by Scout

listing refreshed Jul 22, 2026

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Steam Desk (An Under Desk Steam Deck Mount)

for Steam (2009)

Tom + Follow

Card & Deck Holders

1 plate 4h 59m 0.4 mm 229 g PLA Free

View Print on MakerWorld

Please support Tom by Liking/Boosting their Print on MakerWorld.

Before you print

✓ Needs about 229 g

Print profiles

0.2mm layer, 4 walls, 25% infill

1 plate 4h 59m 0.4 mm 229 g PLA

0.2mm, 4 walls, 25% infill, shortened for vertical mounting

1 plate 3h 35m 0.4 mm 159 g PLA

As sliced by the designer. Your printer, filament, and settings will change these numbers.

I designed an under-desk mount for my Steam Deck as it never had a place to live up until this point, didn't realize how much I used it until recently so figured it was worth sharing over here…

I saw a few similarly designed mounts available on Amazon and figured why not design and print my own, and it's worked perfectly ever since.

Can be mounted with a few wood screws or double sided tape (haven't used double sided tape so be careful) and is also compatible with dbrand's Killswitch, I would recommend double checking the width clearance with the top cover on your steam deck though as that is the widest part of the case :)

If there's anyway I can improve this please let me know, and if you get use out of this please share your printed versions as I love seeing them :)

EDIT: Thanks for all the suggestions on Reddit, I have slightly changed the model by adding a series of fillets and chamfers that should make the final design slightly cleaner, I have also added an alignment tool that can be printed diagonally on A1/P1/X1 Build plates

steam deck steam deck mount steamdeck under desk desk mount gaming dock