7th Continent Storage Solution

This is my take on a storage solution for 7th Continent with 'What goes up, must come down' and the expansions.
It is designed to fit inside the boxes and will fit nearly all of the components except for the larger 3D balloon.
The storage bins have been designed to accommodate smaller 3D printers as the longest side is 110mm. No supports are needed.

The way the items have been exported from FreeCAD has resulted in the files being rotated by 90 degrees. Your slicing software should be able to rotate them back to the right way up. As a guide, they are designed to be printed the same way up as they are normally used.

For non-commercial use only. Under NO circumstances is this project to be used for commercial purposes or printed and sold without prior permission.