Marvel United - Octagons, New Sinister Six, and RuleBooks Storage

Marvel United - Octagons, New Sinister Six, and RuleBooks Storage

Notes:

• No Supports Needed.

• Your Print Bed needs to be 252mm x252mm at minimum to print these. If you have a Bambu with a filament cutter, I suggest printing the cutter placement piece from Bambu and using my 3mf for your Full Plate Print. You will not be able to use the AMS for this.

This set of trays is designed to be used with the Thinnest MU Box you have, Ex. Into the Spiderverse or Black Panther.

With this insert, I have provided both the STLs and my Personal Bambu .3mf for how I printed it. I hope it helps. If you have any questions please do not hesitate to ask. I am always happy to help.

Print the following for Organization:

1x MU_Octogon_Instruct_v1

1x MU_NewSinisterSix_Tray_v1

I designed this to be storable both flat on the bottom and sideways in a Kallax.

Noted Instructions:

All were Printed at .2mm Layer Height. 15% Cubic Infill 5 Top and 3 Bottom Layers