Arcs TinkerTownGames Token holder

I use a neoprene map for Arcs, so I didn't need the space for the folded cardboard map (which never really lay flat properly). I modified the original token holder model from Smilingbandit2's complete Arcs box organiser by removing the token-holding tubes. extending the depth and modelled slots to fit the gorgeous metal and resin tokens from TinkerTown Games . The model is very dense and rather unoptimized, but prints well enough.

I also modelled and printed a simple base spacer to elevate the card holders to be level with the bottom of the dice tray (not included here, but I can upload if requested). Everything but the map fits well into the box. I keep the neoprene map separately, in the tube that it was delivered in.

I primed and painted the inner slots with acrylic paint to match the token's outer ring of color, and finished with glossy/matte varnish.

Printed using 0.6mm Revo nozzle with 0.20mm layer height at 15% fill on MK3S+ with Polymaker Polylite PLA CF. I would have used Prusament Galaxy Black PLA, but I had run out :(