Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Cuba Libre storage insert - GMT Games
3 plates
13h 10m
0.4 mm
409 g PLA Free
View Print on MakerWorld
Please support user_2097692423 by Liking/Boosting their Print on MakerWorld.
Before you print
✓ Needs about 409 g
Print profiles
0.2mm layer, 6 walls, 25% infill
3 plates
13h 52m
0.4 mm
439 g PLA
0.2mm layer, 6 walls, 25% infill
3 plates
13h 10m
0.4 mm
409 g PLA
As sliced by the designer. Your printer, filament, and settings will change these numbers.
This is an insert for GMT's Cuba Libre COIN game.
There are two options:
• A larger box that stores the cards and other game pieces.
• A smaller box to hold the cards with a spacer to fill the remaining area of the box.
I found that there was plenty of storage using the spacer, and the spacer makes it easier to take everything out of the box.
Covers are included for those of us who like to store their games vertically.
An insert with two options depending on how much storage you want. Covers are provided to allow for vertical storage.
/pic9363366.png)
/pic2587010.jpg)
/pic7465002.jpg)
