No Logo - Card Deck Storage Box

This is a card box that has been remixed to remove the top image, making it plain with no logo or imagery. It holds 2 standard decks of cards (with or without the original box the cards came in).

There is an optional tray to hold loose cards, or skip the tray if you want to keep the cards in their original box(es). There is an optional gasket in the model, which you may want to print with TPU for a little tighter seal – but this part is optional and the box is still great without the seal.

This model requires 6 metal machine screws (size M3x25) to assemble. This model is designed for the strength and durability of metal machine screws and it may not work well with plastic screws. To buy the right screws, there is a maker supply link in the Bill of Materials section above (be sure to buy two sets so you have 6 screws). Otherwise, you can use these ones from amazon . If you print a lot, consider buying a small kit that has M3x25 and several other sizes of machine screws (I always end up printing a model that needs a different size right after buying one size).