Blood on the Clocktower Grimoire Shroud

I wanted a way to prevent my players from accidentally looking at my Grimoire, so I made this!

I took the clips from Cyklop's death token holder and extended them out with a hole to accommodate a screw post.

You will need:

• Fabric (I used velvet or something velvet-like), cut to 18.5"x26" (47x66 cm); add 1" (2.5 cm) to both dimensions if you'd like to sew in a hem

• 4x 0.5-inch (12 mm) grommets (you will also need a grommet punch)

• 4x 0.25x0.25-inch (6x6 mm) screw posts (also called binding screws or Chicago screws)

• Hammer

Assembly:

• Cut your fabric to size, hem if desired

• Cut 4 slits evenly along the long edge

• Work the slits wide enough to fit your grommets

• Using the grommet punch and a hammer, affix all 4 grommets to the cloth

• Insert one end of the screw post through the grommet, and attach the 3d-printed clips to the back of fabric using the other side of the screw posts

• Enjoy!