Travel Cribbage Set

For the lines, I used waterslide decal paper with the attached PDF.

I also added a multi-body STEP file with simplified lines for multi-color printing.

These are the settings that worked for me with generic PLA on my QIDI Plus4.

•

Crib & Crib w Lines

•

Print-in-place

•

0.16 layer height

•

I used a brim because the snap-fit closure tabs wouldn't always adhere

•

Other adhesion methods would probably work

•

Slide

•

0.08 Initial layer

•

Critical for tiny dovetail feature

•

0.10 Other layer height

•

Takes some force so snap into board

•

It helps to push in the center to flex the slide cover

•

Peg

•

I printed small side down with large brim

•

SLOW it down, like 5mm/s