Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Twilight Imperium 4 Strategie Ständer auf A1 mini

4 plates 8h 38m 0.4 mm 186 g PLA Free
View Print on MakerWorld

Please support Wolfhammer by Liking/Boosting their Print on MakerWorld.

Before you print
Needs about 186 g

The original of 3DMakeryDE cannot be printed on A1 Mini. That's why I made this remix. An AMS is not necessary.

Customizations

The stand and the two substructures were only shortened in length from 100% to 98%. This allows them to fit diagonally on the print bed of the A1 Mini. The cards still fit in perfectly.

The substructures need supports. I recommend tree (auto).

The width of the substructure inserts has been reduced from 100% to 98%. The commodity tokens still fit perfectly into the slots. The substructure inserts have also been increased by 2mm, which increases the color visibility. They must be printed 8 times in matching colors.

Have fun playing

Your Wolfhammer

Translated from German - show original

Das Original von 3DMakeryDE kann nicht auf A1 Mini gedruckt werden. Dazu habe ich diesen Remix gemacht. Eine AMS ist nicht notwendig.

Anpassungen

Der Ständer und die zwei Unterbauten wurden nur in der Länge von 100% auf 98% gekürzt. So passen sie diagonal auf das Druckbett des A1 Mini. Die Karten passen dennoch perfekt hinein.

Die Unterbauten benötigen Stützen. Ich empfehle Baum (auto).

Die Unterbau Einsätze wurden in der Breite von 100% auf 98% verkleinert. Die Warentoken passen dennoch perfekt in die Schlitze. Die Unterbau Einsätze wurden auch um 2mm erhöht, das vergrößert die farbliche Sichtbarkeit. Sie müssen 8 mal in passenden Farben gedruckt werden.

Viel Spaß beim Spielen

Euer Wolfhammer

ti4 twilight imperium twilightimperium A1 Mini