Board Game Insert: Root + expansions

• Inner box dimensions: [215mm, 279mm, 68mm]

• Lid lift: None.

• Sleeves: Maybe. The width of the card box is sufficient, but you'll probably have to leave out one of the two main decks. I don't sleeve myself, but if someone tests it (with all-cards-box.stl ) and posts a Make, I'll update the info.

##

Root is stored in two boxes. One expansion box holds both maps, closed path markers and all faction mats.
The main game box contains everything else.

This insert stores:

• Root base game

• Root: The Riverfolk Expansion

• Root: The Underworld Expansion

• Root: The Marauder Expansion

• Root: The Exiles and Partisans Deck

• Root: The Vagabond Pack

• Root: Riverfolk Hirelings Pack

• Root: Underworld Hirelings Pack

• Root: Marauder Hirelings Pack & Hireling Box (not the hireling box itself, obviously)

• Root: Landmarks Pack

• Root: Resin Clearing Markers

The mechanical expansions are not included, but since they consist mainly from cards and boards (and a few tokens), it could be possible to add them, putting all the bots faction boards into another expansion box. I did not test this, since I don't own mechanical expansions.

For assembly, follow the attached photos.

You'll need:

• 1x spare-tokens-box.stl (spare tokens with letters on the other side)

• 2x vagabond-box.stl (for two Vagabonds)

• 1x loners-hirelings-box.stl (stores three single meeple hirelings - Outcast, Protector and Flotilla)

• 3x large-hirelings-box.stl (hirelings for Moles + Crows, Cats + Band and Badgers + Rats; tokens together with meeples)

• 2x small-hirelings-box.stl (hirelings for Woodland alliance (including green dice) + Lizards and Bandits + Eagles)

• 1x hirelings-dice-box.stl (hirelings dice and tokens)

• 3x medium-faction-box.stl (Badgers, Eagles, Lizards)

• 1x moles-faction-box.stl (Moles – this one has a crowns department and special cutout for burrow token)

• 3x small-faction-box.stl (Otters, Crows, Woodland Alliance)

• 2x large-faction-box.stl (Cats, Rats)

• 1x all-cards-box.stl (all small cards)

• 1x resin-markers-box.stl (resin markers + cardboard markers)

• 1x landmarks-dice-box.stl (Landmarks + d12 dice (and possibly one hireling dice))

• 1x large-cards-box.stl (hirelings cards, advanced setup card, ruin tokens and items offer)

• 1x items-offer.stl (offer of items to be crafted; can be directly used in play and fits inside large cards box)

You can also use:

• up to 8x card-separator.stl (or any other number that seems reasonable to you)

I printed from PLA. It's possible to print without any top and bottom layers. I prefer Honeycomb, but other infills such as Grid should work as well. This saves both time and the amount of filament used. If you do this, consider increasing infill extrusion width (up to 0.9mm) and infill percentage (up to 25%), to create sturdier bottom.

##

Full OpenSCAD source code is available on https://github.com/stinovlas/boardgame-inserts .