Dodgy Too Many Bones Character Case

This is a repost of my model from another site . Future updates will be here.

This is a character case for Too Many Bones . It was specifically designer for Undertow because other character cases I have tried are too big. This one isn't. It's about as small as I can make it, which is just the right size for two of them to fit in the space of a TMB Dice Storage Tray .

Features:

• The beautiful dice and character chip are visible through the lid.

• The holes on the bottom allow you to push a dice up for easy removal.The character spacer is beveled. Push on one edge to lift out the other.

• Separate spacers to handle characters with 1, 2, 3, or 4 chips.

• The lid snaps on the top to hold everything in.

• The lid snaps on the bottom to keep it out of the way.

• New: Updated with a dice blocker for Riffle.

Notes:

• Sorry about the orientation of the Character Box. Rotate it so the bottom is on the build plate.

• On my old printer, the spacer just barely fit in the chip holder. It required some force to get it all the way down. It's looser on my new printer. If you want to adjust the fit for your case, scale the X and Y dimensions and leave the Z axis alone.

• For a 4 chip character the bevel on the spacer can't be as deep, so it isn't as effective. Take out the initiative chip and you can get the bottom chip out easily from the side.

• Thank you some people that supported this while I couldn't. To RisingTide84 for a Riffle remix , ph_online for the 3 chip spacer , Brendan for a Hollow Spacer for Polaris or Gale , Brendan again for tyrant boxes , and MaHera87 for additional storage options !

TMB Character Print Guide: (* = I have this so it’s verified)

• Too Many Bones Base Game (*)
• Boomer - TMB 1 Chip Spacer

• Patches - TMB 1 Chip Spacer

• Picket - TMB 1 Chip Spacer

• Tantrum - TMB 1 Chip Spacer

• TMB: Undertow (*)
• Duster - TMB 2 Chip Spacer for character chip and Nightshade

• Stanza - TMB 1 Chip Spacer

• TMB: Unbreakable (*)
• Figment - 2 Chip Spacer for character chip and and the "Phases" Chip

• Gale - TMB Gale 1 Chip Spacer for character chip and 4 square scar markers

• Carcass - TMB 1 Chip Spacer - Adds 8 Recipe Cards and 1 Cookbook which won't fit in the case

• Dart - TMB 2 Chip Spacer for character chip and 1 Boar'd Chip

• Gasket (*) - TMB 1 Chip Spacer

• Ghillie (*) - TMB 4 Chip Spacer - Adds 3 Pet Chips

• Lab Rats (*) - Has 4 Character Chips, 4 Character Cards, 5 "3" Health Chips
• The character cards fit in the case on top of the dice.

• Two recommended options
• Print the Dodgy TMB Lab Rat Fanny Pack for the 4 character chips and no Spacer to fit the 5 "3" health chips in the case.

• Skip the Fanny Pack and use the TMB 4 Chip Spacer for the 4 character chips and keep the "3" health chips with your other health chips.

• Nugget - TMB 1 Chip Spacer

• Polaris - TMB Hollow 1 Chip Spacer (Remix) for character chip and the 5 metal orbs

• Riffle (*) - TMB 1 Chip Spacer - Needs Riffle Blocker because only 10 die - Adds a deck of cards
• If you want to keep the cards with the character case, print the optional TMB Riffle Fanny Pack

• Static - TMB 3 Chip Spacer for character chip and 2 Electrify Chips

• Tink - TMB 4 Chip Spacer for character chip and 3 Bot Chips