Boardgame Insert - Clank Catacombs & Expansions

Update 2024.12.03 : Added a split folder, for people who don't have a large enough print plate. Thanks @Libery300_877863 for the suggestion

This insert is designed to organize and allow for quick setup and storage of the various components of Clank Catacombs, Lairs and Lost Chambers and also Adventuring Party.

All card holders are designed to store sleeved cards (up to 100µm).

If you have trouble knowing where each component is stored, I invite you to open the PDF, everything is explained there.

• You will have to print 6 x “PlayerPlate”
Personally I prefer to print one of each color referring to the color of the 6 "Lost Chambers" characters.

• You will find a variant of the “PlayerPlate” in the files named “PlayerPlateVariant”.
I prefer this variant to the first, because it is more practical, but it is also less thematic.
It is up to you to choose which version satisfies you best (but remember, you only need one plate for each character ^_^)

• The ReserveDeck part is 290mm long.
For those of you who don't have a big enough plate, you can print the pieces in the “Split” folder.
You will have to glue them back together.

• All the parts are optimized to be printed with :
• Nozzle : 0.4

• Layer height : 0.2 (including the first one)

• Outer & Inner Walls : 115% (or 0.46mm)

• Wall loops : 3-4

• Infill density : 10%

My logo is made by a wonderful artist : Manon