Dodgy Too Many Bones and Undertow Character Case

Update: Future Updates will be here: https://www.printables.com/model/1323281-dodgy-too-many-bones-character-caseThis is a character case for either Too Many Bones or Too Many Bones: Undertow. It was specifically designer for Undertow because other character cases I have tried are too big. This one isn't.It's about as small as I can make it, which is just the right size for two of them to fit in the space of a TMB Dice Storage Tray.Features:The beautiful dice and character chip are visible through the lid.The character spacer is beveled. Push on one edge to lift out the other.Separate spacers to handle characters with 1, 2, or 4 chips.The holes on the bottom allow you to push a dice up for easy removal.The lid snaps on the top to hold everything in.The lid snaps on the bottom to keep it out of the way.Notes:Sorry about the orientation of the Character Box. I'll eventually figure out how to fix that in Fusion 360. Rotate it so the bottom is on the build plate.The spacer just barely fits in the chip holder. You may have to push down hard on multiple sides to get it all the way down. It's intended to stay put once it's in. If you prefer a looser fit, scale the X and Y dimensions to 99% (about 40mm) and leave the Z axis alone.For a 4 chip character the bevel on the spacer can't be as deep, so it isn't as effective. Take out the initiative chip and you can get the bottom chip out easily from the side.