Fantastic Factories Vitamins

Vitamin tokens for the "Manufactions" expansion for Fantastic Factories: https://boardgamegeek.com/boardgameexpansion/319035/fantastic-factories-manufactions

For each vitamin, print two "caps" in different colors (e.g. red and blue), and print one "core" in a third color (e.g. grey). Apply a drop or two of Cyanoacrylate (Krazy Glue, Gorilla Glue, etc.) to the ends of the core, and stick the two caps on.

Printer: Anycubic Mega-S

Supports: No

Resolution: 0.1mm

Infill: 0%

Notes:

I printed with a 0.1mm layer height because I wanted them to look smooth. You could get away with 0.15mm or even 0.2mm I suspect.

Since there's not a lot of surface area in contact with the print bed, I used a brim to keep the small pieces anchored (see slicer screenshot). I adjusted the "brim separation gap" to 0.2mm in PrusaSlicer so that the brim would be easy to remove.