One Piece TCG deck box for Toploaders

for One Piece: Adventure Island (2025)

Pmdage

Card & Deck Holders Free

View on MakerWorld 38 84 Added May 17, 2026 · Updated Aug 16, 2026 Support Pmdage by Liking/Boosting their model.

Plan Your Print

✓Needs about 204 g From the designer's print profile

✓Fits sleeved cards

✓Fits premium sleeves Thick 100+ micron sleeves, not just standard ones

✓Optional multicolor profile The designer also offers a multicolor way to print this (an MMU/AMS profile or per-color parts)

What it takes

5 plates 6h 204 g PLA

P1S, X1E, H2C, X2D, A1 mini, H2D, P1P, H2S, P2S, A2L, H2D Pro, A1, X1, X1 Carbon

• Only the deck box requires supports. Everything else does not. The included profile takes care of this. • Print at a 0.2mm layer height . The tolerances are designed specifically for this setting and may not work correctly at other layer heights. • Your slicer may warn you about gaps and cuts in the models. These are intentional breakaway points. Please ignore these warnings. • These breakaway points need to be freed before first use. Do this manually by pinching the cantilever arms with your thumbs or pressing them against a flat surface. Yes, it will crack, and it will be fine :) • Most PLA brands and colours are easy to free up, but some combinations may result in stiffer parts that require a bit more pressure to break loose. The design works very well, you may just need to work it a little harder depending on your filament. • For those who do not have an AMS, there is an alternate lid where the pattern has been slightly recessed .

Plate Details (5)

0.4 mm nozzle, all plates

Plate 1 · One Piece TCG - Deck Box - Toploader

2h 36m 110 g PLA · 110 g

Plate 2 · Drawer - One Piece - Toploader

46m 28 g PLA · 28 g

Plate 3 · Lid - Joly Roger - AMS - 2 color - One Piece - Toploader

52m 22 g PLA · 20 g PLA · 2 g

Plate 4 · Lid - Joly Roger - No AMS - One Piece - Toploader

41m 18 g PLA · 18 g

Plate 5 · Lid - Joly Roger - Full Color - One Piece - Toploader

1h 4m 26 g PLA · 20 g PLA · 2 g PLA · 2 g PLA · 2 g

Model Description

One Piece TCG deck box for Toploaders

Main features…

The LEADER slot is designed to fit in a standard toploader.
Separate sections for the MAIN DECK and DON!! cards, both sized to work with Dragon Shield matte sleeves.
A drawer at the back that holds plenty of dice and tokens.
The lid and drawer both use cantilever-style “click-in-place" snap-fitting, making it secure and easy to use.
For those who do not have an AMS, there is an alternate lid where the pattern has been slightly recessed .

This design has been through a bunch of iterations. I tweaked it over and over from actually using it and hearing what worked and what didn’t around the house (we have quite a few players here). This version is what we ended up having after plenty of actual use, feedback, trying out new ideas, and working through everyone's wish list.

This is part of an ecosystem of deck boxes. Check out my profile below for other games such as MTG Commander, Cyberpunk, and more to come.

Check out the rest of my work here:

https://makerworld.com/en/@user_2443559174/upload

If you like what you see , there are two ways you can help me make more designs.

An easy way is to boost me through Makerworld. Another way to help out is to (via Ko-Fi).
Boost Me If you print any of these and they work well for you, a boost on MakerWorld is a great way to show it. Boosts earn me points I can put toward filament, materials, and parts, which matters more than it sounds. Every design here went through multiple prints before I was happy with it. Either way, happy printing.

TCG tcg ONE PIECE One Piece one piece one piece tcg card cards trading card game trading card games