Log in to join the conversation.
Dragons Down Legendary Organiser - No box lift
Please support Bimblybob by Liking/Boosting their Print on Printables.
-------------------------------------------------------------------
v3 is available below: changes to the the monster chip trays. It should also accomodate Natives too.
A maker reported that the terrain crates were too tight on their terrain card. I have provided a terrain crate with no lip which should prevent that problem but conversely the will not stay closed if tipped.
-------------------------------------------------------------------
This is an insert for Dragons Down. Print one of everything. I have included a blank terrain crate if you don't want the terrain name on the side, print 5 if you're using that.
The largest piece is 150mm * 171mm.
Print Settings
• 4 walls
• 4 top layers
• 3 bottom layers
• 5% cross hatch infill
• 0.2 layer height (could get away with much higher)
Each terrain crate holds its relevant monster chips, wilderness and site tokens, civilization card and a random mix of magic cubes in the three recesses. Each tray can store a maxmum of 32 chips which more than covers the possible summons from each terrain. The whole tray is topped off by the terrain card itself (sliding in) and the terrain name is cut into the side of the tray.
The remaining monster chips are stored in Chips_A_x1-v3. This will store the Adult Dragons, Bandits, Elementals, Kobolds, Ogres, Orcs, Owl Bears, and Trolls (these are all the monsters which can be summoned by multiple terrain types). The hero chips are stored in Chips_B_cardboard_x1_v4s. There is a deep well to store cardboard money, or the magic cubes if you don't like them in the terrain crate.
Small cards* are vertically stored in a single caddy, it will not fit with sleeved cards. I will refactor this piece when I receive Natives.
The hero's lineage and class cards, targeting tokens, health hearts, might, speed and status cubes are separated in one tray. The 4 Bandit chips just sit loose on top of the card stack.
Fame and Legend tokens have their own tray.
Dice and Money* are stored in their own tray.
*This will not fit sleeved cards and I have provided a cardboard money storage solution in the Chips_B_choose1_cardboard file. This insert should support the extra wilderness and civilisation tokens provided by Natives and there will be enough room for the extra monster chips. The small card solution may require tweaking when Natives comes along but I'm convinced that not much will have to change to fully accomodate Natives - just the small card caddy and the chips B tray.
It goes without saying that you'll be discarding all the stock inserts.
This is a game organiser for Dragons Down + Desolation (Legendary edition) to ease gameplay all in a single box without any lid lift. Does not support sleeved cards. Files link: Minimum print area: 150mm * 171mm