Roll for the Galaxy plus Expansions Remix

Remixed Roll for the Galaxy organizer that includes Ambition, Rivalry, and 2016 promo tiles.

I keep starting bits in each cup (dice, pieces, 12 vp chips), so changed the layout of one tray. The new tray is RftG_Etc_Box. Use the lid from the source design (I had to shrink the lid 99% and lightly file the tabs, YMMV.) I moved extra vp chips to the empty spaces in the big faces box since my yellow dice are premade.

Print 1 of each file, and 2 Long Lids. DO NOT print proto box/lid nor VASEMODE_Cup unless needed. The 2 tile boxes and other 2 square trays are from the source design.

The largest dice tray is 231mm. For those who can't make a print that large use my prototype design: 3x Dice_BoxRed+Lid, and 4x protoBox+Lid will hold the dice.

I have the silenced cups foam mod, and I use a snack container on top. I know most won't have that container, so there's a vase mode print that can be used on top of the stacked cups instead: rftg_VASEMODE_Cup. And here is a link for the very cool foam cup mod: https://boardgamegeek.com/thread/1303804/article/19636845#19636845

I made my own tile bag, but I've shown in the 2nd photo all the loose tiles with the black bag folded up next to them to illustrate how they fit in the box.

Finally, please note - the creative commons license is different from the original. My remixed design is Non-Commercial Share Alike. I encourage using my design for your own personal use, but any published remixes must use the same non-commercial license.

tl;dr: to fit everything in the box store starting pieces in the cups. Print the new etc box to hold the square chips. Print the new dice trays. Don't sell my design on Etsy.

Original Source: https://www.thingiverse.com/thing:3818105

Printer Brand:

Creality

Printer:

CR-X

Rafts:

No

Supports:

No

Resolution:

0.32

Infill:

15%

Filament: Inland PLA Glass Yellow

Notes:

One of the files is clearly marked as a vase mode print and must be printed in vase/spiral mode. I recommend .8 extrusion width (even with a .4 nozzle--increase the temp at least 10-20 degrees so the nozzle can handle all that filament flowing out of it!) I printed all lids with -0- top, -0- bottom layers, fast honeycomb infill.

Category: Toy & Game Accessories