Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Crokinole Button Holder
1 plate
1h 56m
0.4 mm
59 g PLA Free
View Print on MakerWorld
Please support acenine by Liking/Boosting their Print on MakerWorld.
Before you print
✓ Needs about 59 g
Print profiles
7.5mm rim version
1 plate
1h 45m
0.4 mm
60 g PLA
0.2mm layer, 2 walls, 12% infill
1 plate
1h 56m
0.4 mm
59 g PLA
As sliced by the designer. Your printer, filament, and settings will change these numbers.
8 button holder for Crokinole board game (2 player)
Made to press fit onto the rim of the board or to sit on the table next to the board.
Made to printed without supports. I painted on the seams for the best look and functionality (IMO).
IMPORTANT:
The board I referenced is a round Crokinole Canada board with 30.25in diameter and a 0.25in (6.35mm) rim width. The buttons that I referenced have 1.25in (32mm) diameter and 0.38in (9.75mm) width.
You can also check out my 20s holder:
/pic6874498.jpg)
/pic6893980.jpg)
/pic8009621.jpg)
