Sagrada Insert

This is my custom board game insert for the game Sagrada, including the 5-6 player expansion, the Life and Passion expansions, and the Kickstarter player board. It also has space for the final expansion when it is released. I'm always welcome to constructive criticism, or suggestions for improvement. Feel free to comment!

In this design, I've provided two sets of boxes, one for sleeved cards and one for unsleeved cards.I don't sleeve my cards at all, so the sleeved design is based on an educated guess on the sizes. If someone wants to try them out and confirm they work (or don't work), please let me know. It should be obvious how everything fits into the box.

As with all of my designs so far, I've designed it so the insert is flush with the lid with all components in place. It passed the shake test with no issues.

For printing, follow along with the screenshot I have posted in the pictures. It will tell you how many of each STL to print, along with approx cost and time. Please note, you will either print the Sleeved or Unsleeved STLs (depending on your preference)

Update (2021-08-08) - I've added two new files, Player Board Box Part 1 and Part 2, to split the player box in half for smaller printers. I have not printed this to test the fit, so if it does not fit please let me know and I will adjust it accordinging

Update (2022-11-27): I've finally gotten a copy of Glory, and designed some new parts to hold it. I've done a no-sleeves design in one part, and a sleeved design in two parts. Once printed, you can replace the Spacer in the box with the new part(s) and have a complete collection!

No-sleeves: Print the Glory Box (no sleeves)
Sleeves: Print both the Glory Box 1 (sleeves) and Glory Box 2 (sleeves)

Please note, I do not sleeve my games, so I have not tested the sleeved boxes. I've done some math based on the previous boxes, and I believe they will fit