Machina Arcana 3rd Edition (german/english)

Insert for Machina Arcana 3rd Edition:

The original insert for Machina Arcana 3rd Edition is good. I especially liked the lower part, and it works well with sleeved cards.
The upper part of the insert was quite tight and cramped, and the trays were not very stable and very thin. This combination prompted me to redesign the upper part of the insert.

The insert works with the original premium sleeves (in the lower part, which was not changed). It holds the base game, the To Eternity expansion, the From Beyond expansion, and an extra dice set. The player aids can also be laminated. The lid closes flush.

All the stands can be stored fully assembled, and there are separate trays for the characters, monsters levels 1–4, and the doors. The player boards and game board are held in a separate tray. All tokens are sorted into the token tray for quick access during gameplay.

The token tray is 252 mm long, and I printed it at a 45-degree angle on the print bed. The player board tray is 235 mm long. Please note!

The insert has labeled trays. The labels are provided in both German and English. This can be identified by the names of the STL files (_German or _English).
Each file must be printed once.

I printed the insert with a 0.4mm nozzle, a resolution of 0.2mm, and an infill of 10%.

The required material is about 490 grams, and the print took me about 14 hours.

UPDATE:
I created a design for the bottom of the box so that all cards have their own tray and can be used while playing the game.
For the Base.stl: I printed it without the top and bottom layers, split it into 4 pieces in the slicer, and glued them together because the Base.stl is 289.5x289.5mm
. Now the insert requires about 1.3kg of filament and a print time of 26 hours (printed with a Bambu Lab P1S printer).