Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Perfect Gloomhaven/Frosthaven Monster standee

1 plate 32m 0.4 mm 10 g PLA Free
View Print on MakerWorld

Please support Perfect Scale by Liking/Boosting their Print on MakerWorld.

Before you print
Needs about 10 g
Print profiles
0.2mm layer, 2 walls, 15% infill
1 plate 32m 0.4 mm 10 g PLA
Set of 12, detailed numbers, 0.2/0.1mm layer
3 plates 5h 41m 0.4 mm 122 g PLA
As sliced by the designer. Your printer, filament, and settings will change these numbers.

A standee for Gloomhaven/Frosthaven monsters with life counter that satisfyingly clicks into place to prevent accidental movement, and space for 4 status tokens. Life points are tracked with a counter from 0 to 9 and magnetically attached +10 plates. This way the monsters with the most life points will stand above the rest, and powerful monsters tower over their weaker minions.

The model is based on the original by rpgweb with the improvements by JanB . In this version the plates attach with 6x2mm magnets (the same used in gridfinity). The magnets are held in by a snug press fit. I've also slightly rotated the pin on the base to make sure the numbers are centered in the window

Boost Me You will have my gratitude

gloomhaven gloomhaven standee frosthaven standee monster counter tabletop miniature
Gloomhaven box art Gloomhaven 2017
Match filament

Main colors from the cover art. Find matching filament, or tap swatches to narrow.